How to use SP Flash Tool (Smart Phone Flash Tool)

SP Flash Tool Download

SP Flash Tool DownloadThe SP Flash Tool is also known as smartphone flash tool. The SP Flash Tool came in the zip package and The SP flash tool size is “35.58MB”. The file does not contain any password protection.


  • v5.1904

SP Flash Tool-Supported OS-

  • Windows- XP,7,8,10

Disclaimer Note- SP Flash Tool is not hosted or stored in The is not responsible and liable for any damages in case of any harm to your mobile phone by using the above providing SP Flash Tool. it will be used on your own risk. Any problem regarding flash file please contact contact us page.

How To Flash Using SP Flash Tool

Steps regarding computer flashing.

1. Open the flash tool folder and launch the “flashtool.exe” application

2. After launching the SP flash tool application click to “Scatter-loading” option.

3. Now browse window is opened select the Scatter file from flash file” folder and then click to above green color download button.

Steps regarding the mobile flashing.

5. Check the battery percentage of the mobile phone and if it is more than 50% and then you are not required to charge the battery and then you can easily follow the next step.

6. Turn off the mobile phone.

7. Now press the boot key of the smartphone and then insert the USB data cable from mobile to computer. After then connect the USB cable the flashing process automatically begins.

NoteThe flashing process will be taken approximately 15-20 minutes depending on your computer speed. in the flashing process do not disconnect USB cable otherwise it may cause dead or unbrick the device.

8. After completing the flashing process, it shows the green color message on a flash tool which means flashing process is completed then disconnect the USB data cable.

How to do after flashing the device.

After the flashing, disconnect the USB cable and remove and reinsert the battery of mobile. then press or hold the power button and boot the smartphone. Remember that after flashing the device it will take 15 minutes to installing third party application or on other tasks due to which it will be stuck on the logo for some time. After the boot completes, then complete some basic setting of your mobile.

The mobile is successfully flash from “Sp Flash Tool”. This process is very easy and safe.

%d bloggers like this: