If you want to download the LYF F90M Flash File you are visiting the right place. In this article, I provide download links of the flash files (firmware), flash tool and driver. and also explain the guiding of flashing.
Why flashing is important for mobile.
Basically, you know about the operating system. Any operating system contains a version like “Android”. The android is also an operating system but if you face the issue of an android device you can reset the device but so many times the device is not repaired by restore only so another one way it’s flashing. Yes, flashing is a way to repair your device. the flash file is a file of the operating system they write on system memory by using the flash tool and all that process is called flashing.
What is the boot key and which is a boot key of LYF F90M?
In simple words, the boot key is a key that accesses a device driver to install the firmware on the mobile phone.
The boot key of LYF F90M is the Center button.
the step of pressing the boot key
- Turn off your mobile and remove the battery and reinsert.
- Press and hold the Center button and insert the USB cable thought mobile to pc.
- The flashing process begins then release the Center button.
Lyf F90m Firmware and Flash tool.
Lyf F90M Flash File: The Lyf F90M Flash File is packed in the zip package and The file does not contain any password. The flash file is original. The file name is “LYF-F90M-03-15-180219 .zip” and the flash file size is “263.7 MB“.
Flash File Support-
- QFIL Flash Tool.
Flash File Preview-
QFIL Flash Tool Download: The QFIL Flash tool is also known as Qualcomm Flash Image Loader. The QFIL Flash tool also comes in the zip package and The QFILflash tool size is “2.48 MB”. The file does not contain any password protection.
QFIL Flash Tool-Supported OS-
- Windows- 7,8,10
Disclaimer Note- Lyf F90M Flash File is not hosted or stored in flashmymobile.in. The flashmymobile.in is not responsible and liable for any damages in case of any harm to your mobile phone by using the above providing flash file. it will be used on your own risk. Any problem regarding flash file please contact the contact us page.
How to flash Lyf F90M using QFIL Flash Tool.
Steps regarding computer flashing.
1. Open the flash tool folder and launch the “QFIL” application
2. After launching the QFIL application Select the build type “Flat Build“.
3. Click to Browse button and browse the window is opened select the “Prog_emmc_firehose_8909ddr_.mbn” file from the “Lyf F90M flash file” folder.
4. Now click to XML file button and Select the “rawprogram_unsparse.xml” file from Lyf F90m Flash file folder.
5. The Select Patch File Browse window is automatically open then you select the “Patch0“
Steps regarding the mobile flashing.
5. Check the battery percentage of the mobile phone and if it is more than 50% and then you are not required to charge the battery and then you can easily follow the next step.
6. Turn off the mobile phone.
7. Now press the boot key of the smartphone and then insert the USB data cable from mobile to computer. After then connect the USB cable Click on the Download button and the flashing process will automatically begin.
Note: The flashing process will be taken approximately 15-20 minutes depending on your computer speed. in the flashing process do not disconnect USB cable otherwise it may cause dead or unbrick the device.
8. After completing the flashing process, it shows the green color “Flash Successful” message on a flash tool which means the flashing process is completed then disconnects the USB data cable.
I sincerely hope that you like our gives information, give us your feedback in the comments below and thank you for giving valuable time on our site.