Mi Max 3 Firmware (Stock ROM) MIUI 11.

If you are looking for a Mi Max 3 Flash File then you are in the right place. In this article, I provide a flash file download link and I also explain how to flashing Mi Max 3. The Flash file comes in the zip package. In zip, the package contains – flash file only.

Download Section.

MIUI 11 (Latest) Mi Max 3 Firmware.

Filename: nitrogen_global_images_V11.0.6.0.PEDMIXM_20191126.0000.00_9.0…Tgz

File Size: 2.7GB

Mi flash tool installation guide

  • First, download the Mi flash tool and extract the Mi flash tool on your computer.
  • After successfully extracted the mi flash tool file open the extracted folder and launch or run the Mi flash tool installer setup.
  • Next step, click on the next button to continue to installation.
  • Thereafter, the installation process will be taking a couple of minutes.
  • After the installation process will be complete show the finish button click on it.

Full flashing guide in step by step

  • First, download the Mi Max 3 flash file from the above download section.
  • In mobile, open the back panel and short the test point then insert USB cable from pc to mobile.
  • Run the Mi flash tool application and browser the “.tgz” format file.

  • In the last step, click to refresh the button and then tap on the flash button.
  • The flashing process will start. wait a couple of minutes.
  • After completing the flashing process eject the USB cable.
  • All Done.


Disclaimer Note-Mi Max 3 Flash File is not hosted or stored on this site. The site is not responsible and liable for any damages in case of any harm to your mobile phone by using the above providing flash file. it will be used at your own risk. Any problem regarding the flash file please contact the contact us page.

I sincerely hope that you like our gives information, give us your feedback in the comments below, and thank you for giving valuable time on our site.

Leave a Reply

%d bloggers like this: