Mi Redmi 2 (2014818) Flash File download and full flashing guide step by step

Mi 2014818 Flash File / Mi Redmi 2 Flash File 

In this article, I am providing the Mi 2014818 Flash File download link and flashing guide. The Mi 2014818 flash file comes in the zip package and that Zip package contains Mi 2014818 flash file.

Mi 2014818 flash file specification

Mi 2014818(Redmi 2) is the most popular device. The mobile comes at INR-6000 approx price. Mi 2014818 runs on 1GB RAM. You can store music, videos, audio and photos in Mi 2014818 lots of 8Gb storage. Mi 2014818 selfie camera quality is a very high 2mega pixel front selfie camera. Mi 2014818 is run on 1.2 GHz quad-core Qualcomm Snapdragon 410 processor. The battery backup of Mi 2014818 is very good (2200mah powerful batter). Mi 2014818 is 4G supported smartphone. Mi 2014818 comes in “4.70” touchscreen display. 

Mi 2014818 flash file download. 

Redmi 2 flash file comes in Tgz format. Click the given below link to download the flash file.

MI REDMI 2 FLASH FILE DOWNLOAD

Mi Flash Tool Download

The flash tool comes in zip package This zip package contains a flashtool.exe setup file. The flash tool download link is given below.

Download Mi Flash Tool

Xiaomi USB Driver Download

Xiaomi USB driver comes in the zip package. This zip package contains the driver setup file. The xiaomi USB driver download link is below.

Click Here To Be Download Xiaomi USB Driver 

How To Install Mi Flash Tool

Please follow all the steps carefully.

  1. First, download the Mi Flash Tool and extract the Mi Flash Tool on your computer.

 2. Now open the extracted folder and run the installer of Mi Flash Tool on your computer.

3. Click to the “Next” button and continues to the installation process.

4. Now click to “Install this driver software anyway”

5. Thereafter, the installation process will be completed soon. Now click to the “Finish” button. 

How To Install Xiaomi USB Driver 

Please follow all the steps carefully.

  1. Download xiaomi driver on your computer (Xiaomi USB driver link is above)
  2. Now extract the xiaomi USB driver package on your computer.

  • First, you have right-clicked to my computer on PC. and select the manager option.
  • The Computer Manager is launched. Click device manager tab
  • Now the device manager is launched. right-click on your computer name and select Add legacy hardware.
  • Then the dialog box is open, click to the next button.
  • Select Install the driver and press the next button.
  • Click on show all device and then click the next button.
  • Again click to “have disk”  button click to browse button now
  • Driver location is selected.click to open button click Ok button
  • Now showing android ADB interface driver select and click to the next button.
  • Continues to install the driver click on the Next button.
  • Then the dialog box is shown click to install driver software anyway.
  • Click to finish the button.
  • Now xiaomi USB driver is installed.

How to flashing Xiaomi 2014818

First, install Mi Flash Tool and install Xiaomi USB driver on your computer (How to install Mi Flash tool and USB driver guide is present above section).

  • Now, download the mi 2 flash file and extracted the flash file zip package on your computer.
  • Then switch off your Mi 2 smartphone.
  • Now press & hold volume down key and power key at the same time.
  • And then your phone is booted in fastboot mode
  • Now connect your mi 2 smartphone to on your computer via using the USB cable.
  • Then go to start menu and run mi flash tool.
  • Mi flash tool is launched.
  • Now click on the browse button and select the location of the firmware folder
  • Now click on a flash button and flashing process will be started
  • After completing the flashing process if see a passed message see on mi flash tool
  • the phone automatic restarted and disconnect the USB cable.

I hope you like this article. Your question about this guide can tell me by comment or contact section.

%d bloggers like this: