Nokia 3 TA-1032 Flash File (Stock ROM) Download and full flashing guide.

If you want to download the Nokia 3 TA-1032 Flash File you are visiting the right place. In this article, I provide download links of the flash file (firmware), flash tool and driver. and also explain the guiding of flashing.

How to Download and Get Nokia 3 TA-1032 Flash File.

  1. Click below the “Download” button. By pressing that button you will reach the download page.
  2. After downloading the file you can extract the file using the WinRAR tool because the file format is zip and that’s why it doesn’t come to a direct folder.
  3. After the completed extract process opens the extracted folder and you will get a flash file folder.

Nokia 3 TA-1032 Flash File Download

MediaTek Driver Download

Sp Flash Tool Download

Disclaimer Note- Nokia 3 TA-1032 Flash File is not hosted or stored in The is not responsible and liable for any damages in case of any harm to your mobile phone by using the above providing flash file. it will be used on your own risk. Any problem regarding the flash file please contact the contact us page.

How to flash Nokia 3 TA-1032 using the SP Flash tool.

 Steps regarding computer flashing.

1. Open the flash tool folder and launch the “flashtool.exe” application

2. After launching the SP flash tool application Select DA File within Nokia 3 Folder and then click to the “Scatter-loading” option.

3. Now browse window is opened select the Scatter File from the Nokia 3 flash file” folder and then click to above green color download button.

Steps regarding the mobile flashing.

5. Check the battery percentage of the mobile phone and if it is more than 50% and then you are not required to charge the battery and then you can easily follow the next step.

6. Turn off the mobile phone.

7. Now press the boot key of the smartphone and then insert the USB data cable from mobile to computer. After then connect the USB cable the flashing process automatically begins.

NoteThe flashing process will be taken approximately 15-20 minutes depending on your computer speed. in the flashing process do not disconnect USB cable otherwise it may cause dead or unbrick the device.

8. After completing the flashing process, it shows the green color message on a flash tool which means the flashing process is completed then disconnects the USB data cable.

How to do after flashing the device.

After the flashing, disconnect the USB cable and remove and reinsert the battery of mobile. then press or hold the power button and boot the smartphone. Remember that after flashing the device it will take 15 minutes to installing third-party applications or on other tasks due to which it will be stuck on the logo for some time. After the boot completes, then complete some basic settings of your mobile.

The mobile is successfully flash from “Sp Flash Tool”. This process is very easy and safe.

Note: All above-provided guide is followed by you on your own risk is not be responsible for any damage of your mobile and for any query regarding this guide or other contacts on the contact us page.



%d bloggers like this: