If you are looking for a Tecno KC8 Flash File then you are the right place. In this article, I provide a Tecno KC8 flash file download link and also explain how to flashing Tecno KC3. The firmware was coming in the zip package. In zip, the package contains – flash file only.
Pre Requirements Before Flashing
- Before flashing charge your smartphone battery up to 50 %.
- You need an operating system like- laptop or computer.
- You need a micro USB cable to make interface.
- You need a Flash File and Flash Tool.
Tecno KC8 Flash File Download.
Sp Flash Tool Download.
MTK USB Driver Download.
Tecno Flash Tool Download.
[h]Full Flashing Guide[/h]
Step By Step
- Firstly of all download, the Tecno KC8 flash file.
- The Tecno KC8 flash file you have downloaded is in the zip format. extract the file using WinRAR tool.
- Open the extracted folder and then open the sp flash tool folder.
- You, will, see a flash_tool application on the sp flash tool folder and launch the flash_tool application on your computer.
- Sp flash tool is launched. Click to select the scatter-loading option and then select the scatter file from a flash file folder.
- A scatter file is selected. after file being added. Click the download button.
- Power off your Tecno KC8 smartphones and press volume + key and insert USB cable. Wait to Flashing process is complete.
- After showing a green color ring Its mean flashing process is completed.
- Disconnecting the USB cable from the mobile phone and remove the mobile battery and reinsert it.
- Now boot your smartphone by pressing the power key button.
Congratulations Your Tecno KC8 Successfully Flashed
I sincerely hope that you like our gives information, give us your feedback in the comments below and thank you for giving valuable time on our site.